16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
HOMEPAGE
PARTS AND ACCESSORIES FOR SALE E-MAIL
JOHN 
Lower Fender Support Bracket
We've made the late 3/4 and 1-1/2 Ton WC Fender support bracket.
The early types are always broken or welded. Replace yours with a superior
quality part made by MWM.
Fits all model trucks, early or late.
$25.00 each
PTO Lever Lock
Correct for all 1/2-, 3/4-ton WC's and the early Civilian Power Wagon. Made
by MWM.
$20.00
WC Dodge Water Tube
This part is often rusting beyond use. Now, we have a new part that
is plated to extend its service life.
This is an important engine component. Don't compromise your engine life.
Correct for all 218 and 230 CID engines, civilian and military.
$42.00
Glove Box Latch, Knob and Pin
Currently in stock are NOS pin and latch along with a metal repro knob.
The pins and latches are almost always missing or damaged.
Knob - $10.00
Latch - $3.00
Pin - $3.00
WC Dodge Dash Hole Plug
This hole plug is for the late 3/4 and 1-1/2 Ton trucks that had the
extra hole for the voltmeter.
When not used, this plug fills the hole.
$7.00 each.
1/4-Ton Trailer Tandem Hitch Kit
We had several requests for this product. So we made a short batch.
This kit allows you to reinforce the rear crossmember and add another electical
socket so you can tow two trailers in tandem.
$150.00
Dodge Cylinder Head Bolts
NOS tapped head bolts. Used on all Dodge trucks. Can be substituted for
the regular bolts if needed.
$4 ea.
Dodge Knuckle Bearing Cone
We have in stock NOS brass bearing cones for all the 3/4 and 1-1/3 Ton
WC-series Dodges as well as the civilian Power Wagons.
Dodge Carryall Window Clips
We made a small quantity of 1/2- and 3/'4-Ton Carryall rear window clips.
Sold by piece.
$3.50 each.
WC Dodge Header Pipe
MWM is now offering a superior quality product. This pipe is an exact
fit. No more heating and "tweaking" required.
This pipe is mandrel bent so it has a smooth, even radius. Guaranteed satisfaction!
$45.00
Dodge Clutch Kit
Correct fit for all 1/2, 3/4, 1 & 1-1/2 Ton Dodge trucks.
Re-manufactured plate, new disc, pilot bushing, return spring, and throw-out
bearing.
Core required.
Kit - $140.00
1/2 Ton Dodge Drive Shaft with Mechanics U-Joint
NOS Shaft with joints, front or rear, $175.00.
NOS Mechanics U-joint, $90.00 each.
Limited quantity.
Rifle Rack
Best quality repro of this very hard-to-find item.
Carried in most WWII and Early M-Series vehicles.
Currently out of stock.
Super Winch Lockout Hubs
Make your truck easier to drive and reduce wear and tear of the front axle.
Get these hubs and install them in about 15 minutes.
All parts needed for an easy installation included. Correct fit for all
3/4 & 1-1/2 Ton WC series, M37 and Civilian Power Wagons.
$119.00/Set.
Dodge 1/2 Ton 11" Lining Kits
Reline your own shoes with this NOS kit.
One kit per axle.
$17.00/kit.
Front Axle Spindle Bushing
We had these made by the original manufacturer.
Fits all 3/4 Ton Dodge front axle tube & spindles.
$24.00 each.
Military Lug Wrench
Square drive on one end for dual studs. Standard lug nut on the other.
$15.00.
NOS Canvas Tool Bag
These will work for your Jeep, but they are actually slightly larger.
Correct for Dodges, Chev., CCKW's. Mint condition.
$22.00 each.
3/4 T WC Troop Seat Hardware
They're finally done! All of the WC Dodge troop seat parts.
All 3 designs of seat pivot brackets, chain with upper bracket and lower
swivel.
If your truck is missing the seat mount bracket, we have that also.
Correct for all 3/4 & 1-1/2 Ton WC Series trucks.
Seat pivot brackets - $26.00 each
Mount bracket - $14.00
Chain bracket set - $27.00
Shoulder bolt - $5.50
1/2 Ton Dodge Reflector Brackets
Another accurate MWM repro part.
Correct for all open and closed cab pickups.$12.00 each.
1/2 Ton Dodge Cargo Bows
USA made, steam bent bows for all cargo 1/2Tons. One-piece construction.
$150.00 for set of 3.
Ridge Pole, (not shown) - $28.00
Ridge Pole Brackets, (not shown) - $6.00 each.
1/2 Ton Seat Riser
Open Cab seat riser assembly.
MWM repro of this often-cut, broken, rusted piece.
Replace yours for only
$85.00.
Dodge Running Boards
Now in stock - The best quality running boards you can buy. CNC die-stamped
and correct in every way. We've added another quality feature by adding
powder coat epoxy primer to each board. Other models available. Call for
details.
IN STOCK:
3/4 T Command Car, RH..............$295.00 each
1/2 T WC Pickup............................$245.00 each
Dodge Taillight Brackets
Correct MWM, USA-made brackets for your 3/4 Ton WC.
Specify left or right when ordering.
$24.00 each.
3/4 Ton Command Car Door Hinge Brackets
These are the lower front door hinge bracket that bolts on the body side.
Often missing, replace your rusted or missing pieces with these
MWM reproductions. Specify left or right when ordering.
$12.50 each.
Command Car Tailgate
OEM quality tailgate now produced by Midwest Military.
Fits 1/2-Ton and 3/4-ton Command Cars. Completely assembled and ready to
install.
Correct fitting hinge with slotted adjustment holes. T-handle holes, latch
mount holes pre-cut.
You wanted top quality and fit, now it's here. We have even put the chain
hooks on!
Tailgate (without latches, handles or chains) - $495.00
Hinge also available separately - $48.00
Command Car Tailgate Latch
Get this premium latch for your tailgate produced by MWM.
Fits 1/2, 3/4 Ton Command Cars and 1/2 and 3/4 Ton Ambulance rear step applications.
Latch - $75.00 each.
T-Handle - $15.00 each.
Dodge Tailgate Chains
Never before available and no commercial replacement. We now have the correct
chain in stock,
custom-made by MWM in our fab shop. Add this nice detail to your command
car or carryall.
$37.00/pair
3/4 Ton Command Car Rear Floor
Now you can fix the damaged rear trunk area floor
with this MWM reproduction panel.
Exact fit with correct ribs for a quality restoration.
$300.00.
RETURN TO TOP