16075 Highway 13 S., Prior Lake, Minnesota 55372 Phone: (952) 440-8778 or FAX (952) 440-8776
PARTS HOMEPAGE VEHICLES
FOR SALE E-MAIL
JOHN
NOS Douglas Metal Shell Interlinks
1-1 or 2-1 types available.
Other components also available, just ask.
1-1 - $1.50 each
2-1 - $2.50 each
M38 & A1 Rear Floor Hat Channel
These are often rusted out or damaged. Please specify which Jeep when ordering;
they are not the same.
$25.00 each
Canvas Door Frame Handles
We have in stock the early and late type door handles for all Jeep applications.
We reproduced the early type and found NOS late types. Early type was crimped
on, late ones were threaded.
These fit all CJ2A, 3A, 3B, M38, 38A1 and CJ5 applications.
$18.75 each.
Front Seat Pans
These have not been available for at least 10 years.
Now, instead of buying those expensive cushion sets, save money by ordering
covers and our pans.
Die-stamped and correct in every way.
$39.00 each - 2 per vehicle.
M38 & A1 Headlamp Door Kit
We have a small amount of NOS outer headlamp doors available.
We put them together with the seal and our newly-manufactured spring clips
to offer you a kit.
Each outer ring has 5 clips which retain the rubber. Clips were previously
unavailable.
You asked so we made them. All parts are available separately also.
Kit price - $56.00
Door - $28.00
Seal - $10.00
Clips - $3 each or set of 10 for $26.00
M-Series Brake Light Switch
NOS metal shell brake light switch. Limited quantity available.
Trying to do an accurate, premium restoration? You will need this!
$75.00 each.
Water Outlet
We now have a nice aluminum water outlet housing for your F-Head engine.
Commonly corroded and needing replacement on most project trucks.
$13.00
Generator Parts
We now have all the correct parts in stock for your 24 Volt M-series needs.
Accurately reproduced by MWM.
Lower Mount - $25.00
Mount Bushings - $5.00 each
Special Mount Bolts - $4.00 each
Upper Adjuster - $14.00
Jeep Pedal Shaft
Trying to take the slop out of your clutch & brake pedals?
Use this MWM-produced part. Correct for all Jeeps. We also have NOS pedal
shaft brackets with the bushing for the M38 & 38A1.
Pedal Shaft - $30.00
Bracket with Bearing - $30.00
M38 A1 Data Plate Set
These plates are the most accurate reproductions on the market.
We just had these made. Etched brass just like the originals.
We also have the rivets and master plate to mount them on. In stock and
ready for shipment.
6 plate set - $48.00
Rivet set - $3.00
Master plate (not pictured) - $17.00
Fording Plate (not pictured) - $10.00
Patent Plate - $10.00
On-Off - $10.00
Backing Plate for Data Plate Set
A MWM repro of this never before available part.
Made from an NOS original, perfect fit.
$17.50 each.
Starter Support Bracket
$9.50 each.
M38 & A1 Horn Switch Adaptor
We just finished running this part. There is always damage from rust
on the threads and guide tube.
Correct fit and function for your project. Press fit into the bottom of
the steering gear.
$24 ea.
Jerry Can Spacers
USA-made, correct for all M38 and A1 Jerry Can mounts.
These are even "Parkerized" like the originals.
$17.00/set of four.
Distributor Cap Assembly
We just found a quantity of NOS distributor cap assemblies.
Inner and outer cap are a $95.00 value. Get yours for $50.00
for a limited time.
Fits all M38, 38A1, M151 Jeeps, M422 and PE95 gensets.
Jeep Clutch Kit
This kit will fit all 4-cylinder Jeeps from 1942-1965.
Plate, disc, pilot bushing, return spring, throw-out bearing and collar.
Core required.
Totally new package - $175.00
Rebuilt plate package - $140.00
Carb Kit
Now available -- an OEM-quality comprehensive kit.
Includes all hardware and the idle mixture screw.
Stop all those annoying run problems!
$55.00 each or 2/$95.00.
Jeep Bumper
Now finally available -- the correctly made, MWM repro, long bumper for
all late M38 A1's.
No holes to drill. Just paint and install. Correct tapered ends. $90.00
each.
Mirror Arm Assembly
Dissatisfied with the quality of the currently available mirror arms, we
had these nice, USA-made ones produced.
Arm and swivel can be used on M38, 38A1 and M37. We also have the correct
mounting brackets for
each model. All pieces can be purchased separately. Very nice repro black
mirror head also available.
Head is correct for all WWII vehicles and early M38 and M37. Standard color
mirrors also available.
Mirror Arm & Mounting Brackets - $32.00
Black Mirror Head - $27.00.
M38A1 Fording Cable Bracket
MWM reproduction lower fording cable bracket.
These are almost always missing.
Complete your restoration with this piece for only $15.00.
Wiring Harness Kits
Accurate reproduction harness kits with metal Douglas connectors.
Available pre-wired for turn signals also.
Replace that old, frayed harness before you have problems.
M38A1 Std. - $535.00
with signal - $575.00.
M38A1 Parking Brake
MWM repro of the pullrod for the A1 Parking Brake. NOS Brakeshoe set.
Pullrod - $24.00.
Shoes - out of stock
Rear Seat Parts
Now you can get all the parts you need to repair or replace those always-missing
components.
Part MWM repro, part NOS.
Call for individual pricing.
Cowl Gasket
Get the best reproduction cowl seal available. Freshly made and guaranteed
to be the best fit on the market. These are not the same as everyone else
is selling.
$38.00
Rear Lift Shackle Bracket
An accurate MWM repro of this often-missing part.
Chain and clip included to retain the pin.
$24.00
Fuel Pick-Up Plate
This is MWM's reproduction fuel pick-up plate. It looks like NOS.
Complete in photos with an NOS filter, or, also available with an after
market filter.
Picture shows the M38A1 unit; M38 looks just like it only shorter.
Complete with NOS filter - $149.00.
Complete with after market filter - $125.00.
Turn Signal Lens Conversion Kit
Installing turn signals on your M-series Jeep?
Then you need this amber lens kit. Everything you need
to convert your marker light to a signal lamp.
$10.00 each.
Jeep Knuckle Seal Kit
NOS set of 4 retainers, springs and seals.
Correct for MB< GPW, M38 or 38A1, and civilian jeeps.
$45.00 set of four.
Battery Cable Set
Correct size, length and ends. MWM repro.
$70.00 each.
Terminal ends are separate at $5.75 each.
Wiper Motor Acorn Nuts
We just had these made by the original contractor.
$3.00 each.
Radio Power Cable Guard
Cover your power cable going across the rear floor with this MWM repro.
Correct for any M38 or M38A1 Jeep.
$15.00
Top Bow Rod Kit
A MWM repro of this always-missing and necessary part to
put your canvas top and side curtains on.
Specify M38 or M38A1 when ordering.
$42.00
Top Bow Rod Brackets
M38A1 Windshield Brackets. Accurate MWM repro. Specify left or right.
$8.50 each.
M38A1 Windshield-to-Hood Rests
Left and right brackets for your 38A1 windshield frame.
Never before available, now a MWM repro is. Comes as a kit.
$24.00/kit.
38A1 Fuel Tank Filler Neck Pre-Filter Screen
NOS.
$30.00
Super Winch Lockout Hubs
Correct fit for all M38's or A1's.
$119.00/set.
Rifle Rack
Best quality repro of this very hard-to-find item.
Carried in most WWII and Early M-Series vehicles.
Currently out of stock.
Cordamatic Light Reel
We just found some more of these NOS light reels, unfortunately the price
had to go up.
These are correct for the M170 Ambulance and the M42 Dodge Command truck.
Get yours before they're gone.
$295.00 each.